-
22-08-2018 #1
NOTE, This item is now back up and I am accepting offers!
Accepting offers on my OmioCNC X6-2200L-USB
https://www.omiocnc.com/products/x6-2200l-usb.html
Pretty good condition though will need trimming back in.
Has had a few hours on it but has been kept in a nice condition.
No crashes. Always used coolant with anti-corrosive.
Can include or sell separately;
-A working PC with Mach3
-Handwheel MPG Pendant HB04 wired
-TPA2 touch probe https://www.kurokesu.com/shop/TPA2
-5L Envirocut SE10 CNC coolant (90% full)
Shipping
Ideally, you will pick this up. But I do have the original packaging so can dismantle and pallet this. Pallets are around £60 to £100. Hard to say without packing it all up.
Can also post courier in separate boxes. Expect a higher price than a pallet...
Photos in the post below.
PM offers in the region of £2500-3000.Last edited by JOGARA; 19-03-2021 at 06:39 PM.
-
23-08-2018 #2
where are you?
-
23-08-2018 #3
Last edited by JOGARA; 23-08-2018 at 10:15 AM.
-
23-08-2018 #4
Last edited by JOGARA; 23-08-2018 at 07:58 PM.
-
03-09-2018 #5
Please could you email me on about this and your other item as I am unable to PM you, unsure if its me being thick or my low post count!!!
thanks
Nick
-
03-11-2018 #6
Hello Jogara
Is your machine still for sale? I had started a build with support from forum members but the support seems to have come to an end. Your machine looks like something I was hoping to build so maybe it will fit the bill. Look forward to hearing from you.
Jim
-
04-11-2018 #7
-
-
The Following User Says Thank You to Clive S For This Useful Post:
-
26-01-2019 #9
Hi, is your machine still for sale? if so, please can you email me on [email protected] to discuss. Thanks
-
10-02-2019 #10
Hi, is the cnc mill still for sale? Eppie.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Should I use this rail or sell on ?
By bbdom in forum Marketplace DiscussionReplies: 1Last Post: 22-04-2018, 08:29 PM -
Broken ballscrew ball? OmioCNC X6-2200L machine
By the_wildgoose in forum Chinese MachinesReplies: 5Last Post: 09-08-2016, 12:47 PM -
BUILD LOG: CNC DIY milling machine . I am considering sell it.
By adrpak in forum DIY Router Build LogsReplies: 1Last Post: 19-06-2016, 06:47 PM -
Edge Probe + tool length probe on same input
By Noplace in forum General ElectronicsReplies: 1Last Post: 18-06-2016, 11:12 AM
Bookmarks