denford novamill atc x homing problem

[Doddy]

The Novamill is similar in someways to the Starmill, I can tell you that on the starmill the X home switch is on the front underside of the right-hand side of the table. There's a tapered length of steel that actuates a microswitch.

Might be similar on the Novamill?

[geoff]

hi guys thank for the info found the homing switch under the front plate on the x axis need to test it tomorrow
also I need to check the main plug between machine and electronics wiggled it about and x would only jog in 0ne direction ok now more investigation tomorrow
many thanks all Geoff