CNC Routerparts machine 2x4 for sale

[marky68]

Hi Bernie, what is the reduced price now?

[BernieNUFC]

Hi Marky68
It is at £3200, i am just about to re advertise it on eBay as i have had an interested party and kept it off.
I went to harrogate show yesterday and the interest in the cnc machines was really surprising so i was tempted to put it back up again after what i have compared to what was on offer :-D
So it will go back on sale today
hth
thanks for asking Malc

[marky68]

Hi Marky68
It is at £3200, i am just about to re advertise it on eBay as i have had an interested party and kept it off.
I went to harrogate show yesterday and the interest in the cnc machines was really surprising so i was tempted to put it back up again after what i have compared to what was on offer :-D
So it will go back on sale today
hth
thanks for asking Malc

Hi Malcolm
I'm just leaving the show now, interesting your comment about what was on offer compared to yours can you elaborate?
Could you send some pictures of everything please?
I presume you want to sell as a whole, I already have a laptop spare and access to tooling.

Mark.


Sent from my SM-G955F using Tapatalk

[BernieNUFC]

Hi Mark
Need to be careful here what i write, its why verbal is better sometimes as the written word can be misconstrued and twisted :-)
The machines on sale were very nice but what you get for your money has to be carefully considered to what you can get from s/h or nearly new available out there, and of course your needs. New always gets you a warranty and support, and you need to be prepared to pay for it, if you are capable operator then that bit could be saved if wanted.
A lot has to be about how much effort goes into setting up these machines and i purchased a quality machine and took a very lot of effort to set it up correct and was rewarded with a very nice setup for the price with a a lot of capability.
I am not dissing anything i saw s maybe my words read wrong to how ithought.

Mine is everything to go as a package and i will not split it sorry about that.

On the eBay advert is a link to video and more pictures
Cheers Malc

Hi Malcolm
I'm just leaving the show now, interesting your comment about what was on offer compared to yours can you elaborate?
Could you send some pictures of everything please?
I presume you want to sell as a whole, I already have a laptop spare and access to tooling.

Mark.


Sent from my SM-G955F using Tapatalk

[marky68]

Hi Mark
Need to be careful here what i write, its why verbal is better sometimes as the written word can be misconstrued and twisted :-)
The machines on sale were very nice but what you get for your money has to be carefully considered to what you can get from s/h or nearly new available out there, and of course your needs. New always gets you a warranty and support, and you need to be prepared to pay for it, if you are capable operator then that bit could be saved if wanted.
A lot has to be about how much effort goes into setting up these machines and i purchased a quality machine and took a very lot of effort to set it up correct and was rewarded with a very nice setup for the price with a a lot of capability.
I am not dissing anything i saw s maybe my words read wrong to how ithought.

Mine is everything to go as a package and i will not split it sorry about that.

On the eBay advert is a link to video and more pictures
Cheers Malc

Thanks Malc,

[BernieNUFC]

Thanks Malc,

thanks mark, probably due to relisting :-)

New link