Quote Originally Posted by dfox1787 View Post
Normally it does do that but recently if i wind it back it jams and doesnt push the morse taper out. I have had the tailstock apart and cant find any issues with it.
All that normally does the extracting, is the tail stock leadscrew hits/pushes the end of the MT adapter.
Could it be the end of the screw has worn down a bit (or could be the MT adapter is a bit short) and the tailstock quill is now bottoming out before the screw hits the adapter?

If you can get the quill out, find a punch/bit bar that'll drop down the thread hole, and you should get the adapter out with a couple hammer blows.