-
09-09-2018 #11
-
09-09-2018 #12
Uh.. no, no windows 10...
Not yet that is...
I dont like the extra layer off user interface windows 10 has. Afraid i cant avoid it in the long run though.
.
Fusion360 is on a desktop machine with a discrete vga card (I5 2500k 8gb ssd+ 4gb1050ti) which is working ok for me for now.
I have not made any designs yet that need better hardware.
I have a windows 7 x64 laptop to run uccnc for now
It is a HP 2nd gen i5 with 8gb memory 1tb sshd.
I want to network them but found uc300eth does not like being networked through a switch to my Fritzbox router for some reason.
I need to do some wiresharking to find out what is going on.
Every time i start uccnc the connection drops.
When i have a direct connection (not on a switch) everything is working great.
Maybe i should not network it and just have it direct connect to the laptop.
The laptop is multifunctional device for now. homework for kids diagnostic tool for my car and so on.
I am moving the kids to their own hardware... trying to claim the laptop for mancave purposes only.
Maybe ill have the laptop wifi connect to the desktop and uc300eth by wired port.
Grtz Bert.
Verstuurd vanaf mijn SM-A320FL met Tapatalk
-
09-09-2018 #13
-
09-09-2018 #14
-
09-09-2018 #15
Yes, but I quite like Windows 10 now, and it was the only option when I ordered my new laptop. I did opt for Pro though as it gives you more control over things.
I've got it on my milling machine with a touchscreen, and I find it far better than 7 or 8 with a touchscreen, but that machine only gets internet connection when it really needs connected, which is the same for all my machines.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
10-09-2018 #16
That is my BIG gripe with Windows 10, that you have so little control over MS assuming control of your machine effectively whenever they like (even with Pro when I was last on Windows 10), so I suppose the only way to properly assume a semi-decent level of control yourself is as you say "only gets internet connection when it really needs connected"
-
10-09-2018 #17
-
02-10-2018 #18
UCCNC 1.2049 was released. It seems that the problem is fixed by this new release.
-
The Following User Says Thank You to A_Camera For This Useful Post:
-
02-10-2018 #19
-
16-03-2019 #20
i had the same problem I acepted the virus ,, Laptop is still working ..
I informed Balasz
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
My UCCNC probing screen and macros
By A_Camera in forum CNCdrive (UCCNC)Replies: 6Last Post: 13-01-2019, 04:19 PM -
UCCNC MyProbe error
By chipxx in forum CNCdrive (UCCNC)Replies: 0Last Post: 22-08-2017, 02:36 PM -
UCCNC Software Info Request
By Roadrunner in forum CNCdrive (UCCNC)Replies: 1Last Post: 31-08-2016, 12:10 PM -
UCCNC and Rodocutter X4 Problems
By RusticRusty in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 06-06-2015, 09:01 PM -
At last, found the bug
By Robin Hewitt in forum Stepper & Servo MotorsReplies: 0Last Post: 20-12-2008, 07:14 PM
Bookmarks