. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Is someone posting under driftspin elsewhere?
    No, someone else.
    Apparently, a lot of people are running into this.
    I've had an Exclusion on my UCCNC folder for a long time, and have not had any issues on two PC's running Windows 10.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  2. #2
    Balasz is already informed
    I had the same problem and accepted the virus had til now no problems

  3. #3
    Quote Originally Posted by karangetang View Post
    Balasz is already informed
    I had the same problem and accepted the virus had til now no problems
    Now we have Feb 2021 and still there are 3 trojan in exe file ?
    Last edited by Tom J; 07-02-2021 at 08:20 PM.

  4. #4
    Quote Originally Posted by Tom J View Post
    Now we have Feb 2021 and still there are 3 trojan in exe file.
    No that isn't correct and I have the answer to why you are seeing these false Trojan results. However, I can't post the answer until I have permission from Balazs, which I'm sure he will give when he replies to my email.

    But in the meantime don't worry there is NO TROJAN or virus in UCCNC.exe
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My UCCNC probing screen and macros
    By A_Camera in forum CNCdrive (UCCNC)
    Replies: 6
    Last Post: 13-01-2019, 04:19 PM
  2. UCCNC MyProbe error
    By chipxx in forum CNCdrive (UCCNC)
    Replies: 0
    Last Post: 22-08-2017, 02:36 PM
  3. UCCNC Software Info Request
    By Roadrunner in forum CNCdrive (UCCNC)
    Replies: 1
    Last Post: 31-08-2016, 12:10 PM
  4. UCCNC and Rodocutter X4 Problems
    By RusticRusty in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 06-06-2015, 09:01 PM
  5. At last, found the bug
    By Robin Hewitt in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 20-12-2008, 07:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •