Quote Originally Posted by Caldwell22 View Post
Hi All,

I am looking for advice/help on repairing my cnc router. I have had the machine for 3 years now and never had any problems ( touch wood ) however having recently moved the machine ( due to relationship split ) i noticed there had been some damage caused ( maybe intentionally !!) .
The Connection that came from the drive board to the PC . I believe it was a 36pin connector where the series of wires had been soldered to . So i am now left with around 18 lose connections . Honestly i have no idea where to start , with sourcing the correct replacement connector and where each of the wires is then connected so any advice would be greatly appreciated ?

on the other hand does anybody know of another way around this , like can i buy a replacement unit to avoid any re-wiring etc as i am a complete novice in these aspects !!

or does anybody know of a company/persons that i could contact to repair.
Click image for larger version.  Name: thumbnail_file1-2.jpg  Views: 318  Size: 17.4 KB  ID: 24802
Click image for larger version.  Name: thumbnail_file-3.jpg  Views: 323  Size: 32.0 KB  ID: 24803



Thanks in advance

Adam
Hi caldwell22,

Is it the standard printerport from the pc to the bob cable?

Those should be pretty standard pinout.

Are you running mach3 ?

What bob or controller do you have?

People need more info to be able to help you with this one :-)

I am hearing about divorces to often on here. Is it a CNC hobby related thing?

I just started this hobby, if so, it is gonna cost me a lot more than anticipated. :-(



Grtz Bert.









Verstuurd vanaf mijn SM-A320FL met Tapatalk