Hi Ravi
Sorry for not replying sooner but have been busy machining parts for my gas turbine.
I see you have carried out some serious mods to your machine and I am pleased you have got it working.
I have downloaded Mach 3 and connected it with a parellel port, the only problem I have now is the emergency stop won’t let me do any machining as it comes up with emergency mode active when I connect to the CNC controller.
The only reason for using Mach 3 is I have an old boxford TCL 125 lathe and a
Wizzard 2000 st engraving machine to hopefully get working and I would use the Mach software for all three machines.

If I don’t get any luck with the software I’ll ask the question on the forum.

Many thanks Len.