Jiachen 1216 router Help ?

**Chaz** · 19-09-2018

I'd probably just look at teh drivers, scrap whatever control system is there and do a retrofit, cant be too difficult. The boards seem well marked, probably a good setup for an Acorn or Mach retrofit.

**Turna** · 26-09-2018

Originally Posted by Chaz

I'd probably just look at teh drivers, scrap whatever control system is there and do a retrofit, cant be too difficult. The boards seem well marked, probably a good setup for an Acorn or Mach retrofit.

Thank you Chaz, I have another smaller machine with stepper control box too. I run Vcarve and Mach3 - would it just be a case of I could use that to run this machine and bypass the DSP ?

Sent from my SM-G965F using Tapatalk

**phill05** · 26-09-2018

PM sent

Phill

**Chaz** · 26-09-2018

Originally Posted by phill05

PM sent

Phill

Offer to fix it?

**phill05** · 26-09-2018

Originally Posted by Chaz

Offer to fix it?

Hi Chaz,

No only supplied the DSP manual and some other files.

We changed from DSP to Mach 3 a few years ago so were no longer needed.

I am currently trying Acorn, after a problem setting it up I now have it test running 4 axis for a router / mill and also have the lathe side running it will be made into a portable unit to take to other machines when complete.

Phill