Control system for Harrison M250 CNC

[Chaz]

I did have a look last night after I posted to see what they've been up to, and noticed that, but $240 for a XHC pendant you can get on Aliexpress for $99 does seem a bit steep.

Cheap and cheerful option for KMotionCNC is a gamepad. Quite a few people use wireless Xbox controllers.

Agreed, there is a markup however they have done all the integration bits to make it work reliably. Ive seen a gamepad being used for the Acorn system too, there was / is a Harrison 300 lathe on ebay with Acorn running with an xbox type controller.

Also, they are about to launch a 16 in / 16 out add on board, lack of inputs and outputs has not helped.