Thread: Technician required
Hybrid View
-
16-10-2018 #1
-
16-10-2018 #2
Hi yes that was the post.
The cnc 3 years old and very well made it has a 1 x 2 meter bed 200mm gantry height, it is 440volt, it will soon have pneumatic material clamps fitted and has a tool bit chiller fitted. It is primarily use to engrave memorials, relief work in stone and war memorial plaques. The machine is used frequently used and operates well. My issue starts here the cnc was built in Poland with PIKO operating software which there is no English software available so operating the cnc has been a learning curve. I want to upgrade the control unit to and software to Masso unit or something similar and I am looking for someone to carry out the upgrade.
Thanks for responding
-
16-10-2018 #3
-
20-10-2018 #4
Yes and I am still looking for someone
-
20-10-2018 #5
Hello Boyan thank you for that piece of advice I had no intensions of installing Mach 3 as I have read some negative reviews. As far as staring up is concerned I control the XY axis to suit each piece of work via the controller.
-
15-03-2020 #6
I am looking for someone to modernise /upgrade the controller but I am not having much luck finding somebody who can come back with a straight answer
-
16-03-2020 #7
When having my new 4-Axis VMC built I went for the Siemens 808D Advanced Controller, Servo and Drive system, it added £5k to the price of the machine over that with a Chinese manufacturer's system so I'm guessing it's £7k-10k of the price of the machine.
You think that's too expensive? You're not a Model Engineer are you? :D
-
16-03-2020 #8
Thats great to here I have a polish built machine that cost me 20k not chinese do you know of anyone who can help me with my upgrade? As said its a proffesional machine and I am not a hobbyist
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Opportunity for CAD/CAM Workshop Engineer/Technician in London at Med Tech Startup
By aot in forum Opportunities Available & SoughtReplies: 0Last Post: 25-01-2016, 11:46 AM -
CNC Maintenance Technician Job Opportunity - SeaStar Solutions, Richmond, BC, Canada
By Etranhirose in forum Opportunities Available & SoughtReplies: 0Last Post: 10-09-2015, 12:35 AM -
Help required with desktop cnc build - cutting out the required plates
By alanb in forum OpenBuilds OX CNC MachineReplies: 0Last Post: 08-07-2014, 03:11 PM -
NEW MEMBER: Technician, secondary education
By Nic in forum New Member IntroductionsReplies: 0Last Post: 22-07-2011, 12:34 PM -
Maintenance Technician/Engineer
By mvolt in forum Opportunities Available & SoughtReplies: 0Last Post: 16-02-2011, 10:38 AM
Bookmarks