. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 24-10-2018 #13
    Blazing Black Beard's Avatar
    Lives in Not a city, United Kingdom.
    Blazing Black Beard
    Last Activity: 05-05-2022 Has been a member for 6-7 years. Has a total post count of 19. Received thanks 1 times, giving thanks to others 9 times.
    Quote Originally Posted by mekanik View Post
    Most people just use the standard box section, if you are welding there will be distortion you can reduce this somewhat by just stitch welding it, doesn't have to be full weld. the distortion in the base (X) axis is is eliminated with epoxy grout levelling.
    Regards
    Mike
    How can the face on the side of the box section be used to keep the rails parallel though? These can't be poured with epoxy as it would just run down and onto the floor.

    If you look at RoboCNC you'll see he just uses the straight vertical face on the side of the aluminium to keep his linear rails parallel and straight.https://youtu.be/YOVHtjXi07Q?t=2m02s
    Last edited by Blazing Black Beard; 24-10-2018 at 03:21 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules