. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 24-10-2018 #15
    Blazing Black Beard's Avatar
    Lives in Not a city, United Kingdom.
    Blazing Black Beard
    Last Activity: 05-05-2022 Has been a member for 6-7 years. Has a total post count of 19. Received thanks 1 times, giving thanks to others 9 times.
    Quote Originally Posted by mekanik View Post
    The epoxy goes on the rail mounting surface, the guy in the video is using the ally profile as a reference, dont like this unless it's been machined to be flat, you should be using a precision straight edge to set the rails.
    Regards
    Mike
    Yes, that's what I thought. I need to find a precision straight edge then. Any suggestions?

    As for the stepper motors I received earlier, they do not have the D shaped shafts. A friend of mine said it was a shame but they look like quality motors. I'm going to take an educated guess that round shafts aren't as good for this particular application, is this the case? Can anyone see any issues with them being round shafts as opposed to D shafts?
    Last edited by Blazing Black Beard; 24-10-2018 at 04:46 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules