. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 25-10-2018 #1
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 6 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    It looks you have found a very nice cable machine with many good points
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
  2. 25-10-2018 #2
    Richard's Avatar
    Lives in dorchester, United Kingdom.
    Richard
    Last Activity: 11-01-2020 Has been a member for 9-10 years. Has a total post count of 74. Received thanks 2 times, giving thanks to others 2 times.
    Quote Originally Posted by Clive S View Post
    It looks you have found a very nice cable machine with many good points
    It certainly looks ok, not the biggest capacity, but if that becomes a problem, it wouldn't take much to extend the bed...

    Came with laptop and mach3 2.0, collets and a few endmills too.

    VFD is a Schnider ATV12 and stepper controllers are CWD556's. The motion controller is a UC100.
    Reply With Quote Reply With Quote
  3. 13-11-2018 #3
    Richard's Avatar
    Lives in dorchester, United Kingdom.
    Richard
    Last Activity: 11-01-2020 Has been a member for 9-10 years. Has a total post count of 74. Received thanks 2 times, giving thanks to others 2 times.
    I've been checking out the machine some more. Mainly tramming today.

    I found that it was out a little.

    Adjusting the spindle mount to get it perpendicluar to x axis (left/right) is pretty easy, but is there a prefered method to adjust the other direction?

    My tramming arm is 100mm long, so over 200mm I am seeing 0.2mm 'nod' forwards. I was thinking I just need some very thin shim stock under the bottom bolts of the spindle mount?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Just checking if this works
    By jamesd256 in forum New Member Introductions
    Replies: 0
    Last Post: 01-09-2016, 11:38 AM
  2. NEW MEMBER: New to CNC and need some tips for what to look for when buying a laser cnc
    By veviben in forum New Member Introductions
    Replies: 2
    Last Post: 12-12-2014, 09:28 PM
  3. NEW MEMBER: Checking in for an introduction.
    By Steve V. in forum New Member Introductions
    Replies: 1
    Last Post: 06-09-2010, 07:45 AM
  4. Looking for tips on making 2.5 x 1.25 mtr table
    By psiron in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 14-06-2010, 08:09 PM
  5. Bridgeport Tips & Advice
    By Philmollatt in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 01-10-2009, 06:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules