Vector Aspire problem - drill toolpath converted to pocket toolpath

[cropwell]

Does this Morbidelli machine not use standard Machine Codes ?

In your example G0 positions the spindle, G1 drills the hole 10mm deep and then retracts the drill with a G0
A pocket operation would move to a safe height G0 Z-6 for example, move to within the pocket boundary, lower the tool with a G1 Z move and then use G1's to move around to cut out the pocket.

Your Morbidelli owner is probably referring to something in the software he uses to create his G code (???????).

[pablocordal]

I did not know there were standard machine codes. All you say is very interesting. I'm not sure what's the confussion here. I'll check this info with him and let you know.

Thank you very much

[cropwell]

Have a look - https://en.wikipedia.org/wiki/G-code