First Build - Yet Another Alu Profile Router - 900 x 800

[CaptainBarnacles]

I've been taking stock of this project over the last couple of weeks. It occurs to me that I was getting a bit bogged down and getting a bit obsessed with building the ultimate machine first time around. I took a look at my design and looked for ways to simplify it and design a machine that I, with my limited tools and experience, could actually build in a reasonable timeframe.

A few late nights at the computer (I'm finally starting to get the hang of Fusion 360!) and I have this:





The gantry is 2 qty 80x80 stuck together (though I may still add an additional 40x80 on the flat for more of an L shape profile), 40x160 for the Y axis frame, 40x80 for the bed with MDF over.

It's not a million miles away from some of my earlier designs but it feels more mature and I feel happier with it. I have my 150mm Z axis travel, I lost a little on the bed size but I can live with it for now. Time for less procrastination and more building (when the workshop warms up a little).