-
07-11-2018 #1
Hi, I have a Bridgeport interact 520 VMC with heidenhain TNC 155 control. I have various issues with the machine; Sticky limit switches, Buffer battery and parameters, dodgy Z axis encoder all of which have been overcome.
I have written some basic programs and all the axis are operational as is the spindle.
The problem I have now is the tool change height is incorrect. No matter what I change the parameter to the control indicates that the Z-axis has moved to 0.000 for the tool change. As it turns out I need the Z-axis to be at about -7.9mm to be at the correct height.
I have set the positive Z limit to be ~+7mm and the tool change height to be -7.9 but the machine always goes to 0.000 regardless.
Anybody experience a similar problem and know how to overcome it?
Many thanks,
WB
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Bridgeport Interact 720 drawbar removel and inspection
By num1bryanp in forum Bridgeport Milling MachinesReplies: 1Last Post: 22-05-2017, 02:07 AM -
Bridgeport Interact 720 H training material
By num1bryanp in forum Bridgeport Milling MachinesReplies: 0Last Post: 12-05-2017, 04:11 AM -
Bridgeport interact 316 Operation Manual
By wojtekthx in forum Bridgeport Milling MachinesReplies: 0Last Post: 23-10-2016, 10:22 AM -
FOR SALE: bridgeport interact 4
By cutter23 in forum Items For SaleReplies: 2Last Post: 01-07-2014, 12:47 PM
Bookmarks