Thread: Mister control
Hybrid View
-
08-11-2018 #1
I have the commercial misting system that combines air and coolant. But, as is well documented, it is not a good idea to hang around in the foggy environment it inevitably produces.
Having taken that on board is there any kind of work around? i,e, shrouding the cutter or whatever that can be employed that avoids dumping the kit and starting again.
Or is vaporising just not on?
-
08-11-2018 #2
Hi Leadhead
Boyan Silyavski had a look @ this some time ago, if you can find his thread.
Regards
Mike
-
08-11-2018 #3
There's also these things:
http://www.fogbuster.com/
If I ever have a spare minute I will see if it's possible to make a DIY version, surely can't be that difficult. And I think this the link to the other thread?:
http://www.mycncuk.com/threads/8061-...-Systems/page1Last edited by Voicecoil; 08-11-2018 at 09:47 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Fogless Mister Systems
By firetrappe in forum Swarf & Chip ManagementReplies: 21Last Post: 28-01-2018, 08:05 AM -
Control Panel nearly done!
By m_c in forum General DiscussionReplies: 16Last Post: 17-11-2017, 02:00 PM -
Control box
By Kev2960 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-02-2017, 11:14 PM -
Motor control
By D-man in forum General ElectronicsReplies: 14Last Post: 14-02-2016, 03:52 PM -
servo control vs stepper control
By Peter. in forum Motor Drivers & ControllersReplies: 24Last Post: 17-09-2012, 08:36 AM
Bookmarks