Quote Originally Posted by RobC View Post
Holding 0.01mm most of the time, often can be on the measurement I wanted. But my machine is far from perfect, I've had to do a lot of tramming and shimming to achieve such, I built my machine using a drill press and a myford lathe which too isn't perfect. The goal is, if you can't make it perfect, make it adjustable!

This is my first build from no knowledge at all to being able to run it without a single problem which has taken me a few years.

Click image for larger version.  Name: cnc.jpg  Views: 638  Size: 300.1 KB  ID: 28302
Machining within 0.01mm (10 microns) sounds a little optimistic with those slideways and what about ballscrew accuracy and vibration?