-
20-11-2023 #31
Hi, really glad to find this thread as I'm currently planning to swap out the motors on my non working Interact 1 series 2. I see the problem with the short shaft lenghts on these new Chinese servo motors. What route did you go? I was thinking of making shaft extensions something like this and re-using the 12t stock pulley but would the over hang be too much? Cheers Ross
-
20-11-2023 #32
Hi. for X and Y I used Panasonics with standard shaft but its not great. For the Z, I used the next motor up (1KW Panasonic, overkill) for the additional shaft length.
Suppose if you can get the shafts with a good tolerance and some grubs, it would be OK.
-
20-11-2023 #33
Panasonics, what are they? Are they extensions.
-
20-11-2023 #34
No, Panasonic (the brand). For example - https://www3.panasonic.biz/ac/ae/mot...o/a5/index.jsp
-
The Following User Says Thank You to Chaz For This Useful Post:
-
21-11-2023 #35
Dooh! I get it now :)
-
03-11-2024 #36
just see your post
i have an bridgeport interact 1 mark 2 with bosh drives and sem motors and running they bosh drives on single phase and they work well
spindle motor has to be changed
Gerry
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: For Sale Bridgeport MDI Series1 CNC part finished refit
By Norman12 in forum Items For SaleReplies: 3Last Post: 19-12-2018, 10:22 PM -
interact 2 series 4 ,HEIDENHAIN 150 control homing problems
By fastcarl in forum Machine DiscussionReplies: 4Last Post: 28-03-2015, 01:40 PM -
FOR SALE: bridgeport interact 4
By cutter23 in forum Items For SaleReplies: 2Last Post: 01-07-2014, 12:47 PM -
Interact series 2 speed controller problem
By fastcarl in forum Machine DiscussionReplies: 1Last Post: 25-01-2011, 09:50 PM
Bookmarks