Bridgeport Series 1 Interact. Refit/update . Opinions please.

[Chaz]

Thats the Z Pulley, not spindle pulley :-)

How are you going to make up for the shorter shaft? Our machines look identical, apart from your slightly more powerful motors.

My motor has wires that allow for different options, but this is with the outer metal shield removed, will take pics this weekend.

[swarf-boy]

That's what I meant.
Its a real pain uploading photos on here, and I do it all on my phone. I had it all done, but clipped the back button and lost it all again (LoL), so did it again in a hurry.

[Chaz]

Pic with the motor's outer cover removed. You can see the wires coming out allow for change in connection.

[Chaz]

I'm trying to decide what motor to go for.

80 Size - 19mm shaft but 35mm long.
90 Size - 16mm shaft, same length.

Both those have near identical specs.

110 Size is almost a direct replacement but the shaft is 19mm and longer which is I think is ideal. This is for a 1.5 KW setup, around $100 per setup more expensive (not much of a concern).

Which would you go for?