Threaded View
-
21-11-2018 #9
Hi Nick
I will not be vibrating the molds, some sit on a surface plate that is used to provide a flat plane. I will be tamping the mix down in 25-50mm layers.
The Mix will be nominally 12% epoxy by volume. When I do the pour I will do a test just before to make sure the stone and sand batch has not changed.
Page down this post of a previous pour.
https://www.model-engineer.co.uk/for...p?th=51617&p=3
The objective is to use the least amount of epoxy.
I plan to pour over the weekend if all goes well.
Regards
JLast edited by John McNamara; 21-11-2018 at 08:17 AM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
RFQ: Can someone build me a frame and gantry setup?
By GREGGYMAC in forum Projects, Jobs & RequestsReplies: 0Last Post: 09-01-2018, 11:30 AM -
FOR SALE: CNC frame or completed machine
By fifa in forum Items For SaleReplies: 0Last Post: 18-02-2017, 03:52 PM -
BUILD LOG: Desktop type router - Fixed gantry - steel frame MK2
By Tom J in forum DIY Router Build LogsReplies: 14Last Post: 02-01-2017, 09:32 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM -
Damping Machine Frame
By Tenson in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 28-01-2013, 01:44 PM
Bookmarks