@Hulksmash
I am just stripping down a 32B from toolco for CNC conversion. I visited Warco and checked out the other machines from Chester et al., but the Toolco (Weiss Machines) one was the best. The base castings are thicker with better geometry. The motor is more powerful with belt drive. I had to put up with the MT3 version but ordered a spindle from Michael Weiss, the machine manufacturer.

I found Toolco not easy to deal with, but it was worth it for the quality of the machine.

The only snag I can find is the top spindle speed which is something over 2000 rpm. Options for me are to change the pulley ratio or fit a high speed spindle in parallel on the head. Ways and general machine tolerances are extremely good. I can pm you Michael Weiss's email address if you think it will help.

Best Regards

picclock