Quote Originally Posted by Dave_stoke View Post
Thanks buddy, I have listed it for sale. But also reminded the seller I bought it from that they must provide me with a solution as to why it doesn't do what they promised.

As for parts I might drop it for a while, have a break and finish up all the drawings in fusion. I wanted to make a scale hawker hurricane in its entirety with a 1.5mtr wing span. And then maybe a Lancaster. But watch tools were my main project. Haven't managed one yet.

I'll stay on the boards keep watching, reading and learning. Then maybe if things get better buy a proper mill and convert it to cnc.

Sent from my F8331 using Tapatalk
What machine is this Dave? Sounds like a chinese ebay special router.

They don't really work well out of the box and need a bit of wiring doing to get them to work fairly stable. Spindle or machine frame needs earthing, a star point earth helps too, and the spindle cable at least pretty much needs swapping for a shielded CY cable, otherwise you will have all sorts of havoc. Doesn't hurt to do the switch and stepper wires either although not really neccesary.