Thread: help needed with CSMIO/IP-M
-
18-11-2018 #1
Hi chaps. I am trying to wire up the CSMIO/IP-M board. and I am not getting very far. I cant read the wiring diagram on the net as its to small and when I try to print it larger it just looks like a lot of dots. so these are my questions
1. do I need the input terminal block connected if I am using the ethernet cable ???
2. on the outlet side terminal block how do I know which number on the block goes to which input on the stepper motor driver.
3.do I need to use the Estop unit at all, can I loop it for testing on the worktop. is so how. I don't understand how this connects to the CSMIO unit,
4. from what I have read I need to add a plugin to mach3 to make the CSMIO work. is this correct and how do I do that.
sorry for all the questions.
-
18-11-2018 #2
The manual should answer all of your questions.
https://en.cs-lab.eu/wp-content/uplo...oipm_en_v2.pdfGerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
18-11-2018 #3
Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Cs labs csmio ip-s
By Web Goblin in forum Items For SaleReplies: 3Last Post: 22-07-2018, 08:45 PM -
csmio/ip-m z probe
By charlieuk in forum CS-Lab (CSMIO)Replies: 0Last Post: 16-09-2017, 09:49 AM -
CSMIO/IP-M with baldor smartstep/3
By Benja in forum Denford MillsReplies: 11Last Post: 03-07-2017, 12:44 PM -
CSMIO-IP A &a Chinese spindle
By D-man in forum CS-Lab (CSMIO)Replies: 22Last Post: 06-02-2017, 03:44 PM -
Mach3 oem buttons with CSMIO-IP/S
By Web Goblin in forum Artsoft Mach (3 & 4)Replies: 2Last Post: 07-11-2016, 07:14 AM
Bookmarks