Thread: ProMa PPM 0322 CNC mill isel
-
19-11-2018 #1
Completely new to this.... Does anybody have knowledge of these ... what is their controllerboard/driver set up and what software would operate it ... Would also like directions on good controllerboard/driver set up to get for 5 axis milling of metals and minerals in the event of refit project and what 5 axis part to get in the context of jewellery making. Thank you in advance
-
22-06-2020 #2
-
23-06-2020 #3
-
23-06-2020 #4
Hi, I have a document that I can scan and send...do you have the software ( I don't).I haven't used it yet so can't give you more than that...best Brock
-
23-06-2020 #5
-
23-06-2020 #6
Will do Send me your email, regards
-
26-06-2020 #7
-
01-01-2021 #8
Guten Abend zusammen,
ich habe eine PPM-0322 seit 2003 im Einsatz. Angeschlossen noch über einen XP Rechner mit seriellen Schnittstelle.
Als "Neben-CAD" nutze ich Gaalad mit einem für die Fräse konfigurierten Post-Prozessor. (Mein "Haupt-CAD" ist Alibre-Design)
In das auf dem XP laufende editasc importiere ich die Ausgabedatei des Post-Prozessor. Alles weitere (steuerung der Maschine) mache ich mit editasc.
@Finka: Auch ich würde mich über die Dokumentation freuen, denn ich will meine Maschine zukünftig mit einem WIN 10 Prof Rechner steuern.
Gerne teile ich Dir meine Erfahrungen mit, wird aber vermutlich erst im Laufe des Jahres sein. Sobald ich von meiner Anfrage bei ISEL (ProMa ist Tochterfirma) nach Dokumentation habe, will ich dies gerne (über E-Mail) zur Verfügung stellen.
Beste Grüße
Sonnenfinsternis
Edit By Lee - Translation:
Good evening everyone,
I've been using a PPM-0322 since 2003. Connected via an XP computer with a serial interface.
As "auxiliary CAD" I use Gaalad with a post processor configured for the milling machine. (My "main CAD" is Alibre Design)
I import the output file of the post processor into editasc running on the XP. I do everything else (controlling the machine) with editasc.
@Finka: I would also be happy about the documentation, because I want to control my machine with a WIN 10 Prof computer in the future.
I am happy to share my experiences with you, but I will probably only be in the course of the year. As soon as I have received documentation from my request to ISEL (ProMa is a subsidiary), I would like to make this available (via email).
Best regards
Solar eclipseLast edited by Lee Roberts; 01-01-2021 at 11:00 PM. Reason: Translation
-
27-03-2021 #9
hello, do you think you could email me the documentation from this machine?
[email protected]
-
28-03-2021 #10
Hallo. Haben Sie es geschafft, den CNC unter Windows 10 zu bestellen? Ich komme aus Rumänien und bin daran interessiert, diese Änderung vorzunehmen. Was kann getan werden, um zwischen USB und Rs 232 anzupassen?
Translation - Lee R
Hi. Did you manage to order the CNC on Windows 10? I am from Romania and I am interested in making this change. What can be done to match between USB and Rs 232?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Pro Ma PPM 0322 CNC mill
By finka in forum Motor Drivers & ControllersReplies: 1Last Post: 27-03-2021, 09:59 PM -
Isel Kay software.
By Leadhead in forum Machine Control SoftwareReplies: 3Last Post: 21-09-2017, 08:17 AM -
Proma elektronika torch height controler any good
By whensparksfly in forum General ElectronicsReplies: 3Last Post: 06-03-2016, 01:17 AM -
Plasma, Mach3, Sheetcam and a Proma Torch height controller..
By Davek0974 in forum Plasma Table MachinesReplies: 2Last Post: 14-04-2014, 03:49 PM -
Proma THC with Mach3
By gerrymoore in forum Artsoft Mach (3 & 4)Replies: 7Last Post: 25-04-2013, 12:44 PM
Bookmarks