. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-12-2018 #2
    magicniner's Avatar
    Lives in Rotherham, United Kingdom.
    magicniner
    Last Activity: 05-05-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,021. Received thanks 230 times, giving thanks to others 42 times.
    From your link -

    "The SPINx1 is a one channel isolated digital potentiometer intended for spindle control. The SPINx1 takes three TTL level signals, PWM, DIR and ENA and has four isolated outputs: CW, CCW, ENA and VOUT. VOUT is a Analog voltage proportional to the PWM input signal and the Analog reference voltage (5 to 18VDC)."

    You can easily find out by wiring an external potentiometer with it's own PSU and patching that intou your existing system, if that works then the linked unit should work.
    You think that's too expensive? You're not a Model Engineer are you? :D
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to magicniner For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DC motor control
    By phill05 in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 3
    Last Post: 24-12-2014, 04:10 PM
  2. AC servo motor to replace a 3 phase induction motor on a mill spindle.
    By rnr107 in forum Spindles & Drive Motors
    Replies: 2
    Last Post: 23-04-2014, 03:14 PM
  3. Emco C5 spindle motor control
    By GeoffV in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 19-03-2014, 04:20 PM
  4. motor control
    By Phil Gravett in forum Motor Drivers & Controllers
    Replies: 6
    Last Post: 09-06-2009, 05:02 PM
  5. Motor control
    By crazy horse in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 13-03-2009, 09:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules