advoce new cnc router

[fgfreek32]

Hello

the materials will only be alloy,to make parts for quarterscale cars.

The firts picture are the cars i made ten years ago

i did have a machine ten years ago and did sell it.

now i want to build a new machine and the size will be 1000x800.



i did make some big scale cars and have some more ideas to make new ones.
i do want to male a router for these cars and want to know which is better a steel frame or alloy extruded

i allready have made a z-axle

i also want to make it low budget.

i used china linear rails and china closed loop steppers and drivers.

i do believe these parts will do for what i want to use the router for.

The old machine was a bad design and i did make the full cars on the first picture with it

i do have cnc experience for 32 year as miller and turning.

i am good in solidworks and solidcam amd did get the most certificats for it.

i did switch career this year and i do teach kids in the age 13 /14 years at school in the technicals skills.

sorry for the dutch english




grt frank