Quote Originally Posted by Gary View Post
You can use the 110V transformers that are used fro 110V power tools.
They are not that expensive.
That's what I used - a 3kW one from Screwfix Direct - it was about £68 from memory.

It officially isn't rated for 100% use, but I ran it for about 3 hours and it didn't get hot at all (37 deg.)



In fact, it says that you should run it for only 5 minutes every 20 minutes.

ETA: It runs all 3 of my motors (although now I've got a 4th to go in, I'll see how much hotter it gets).