. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-01-2019 #2
    john swift's Avatar
    Lives in merseyside, United Kingdom.
    john swift
    Last Activity: 18-01-2021 Has been a member for 9-10 years. Has a total post count of 257. Received thanks 53 times, giving thanks to others 0 times.
    If you use a TB6600 stepper driver set to 4A
    a stepper motor rated at 4.2 amps will run at the 4A set by the driver so there should be no problem
    the motor torque will be reduced to 4/4.2 of the rated torque

    having said that I would be inclined to use the TB6600HG so the stepper driver is not run at is limit

    John
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to john swift For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How do I wire a stepper driver to a stepper motor?
    By swood1 in forum Stepper & Servo Motors
    Replies: 7
    Last Post: 21-09-2014, 05:40 PM
  2. No longer lurking, stepper motor question.
    By simonparkes in forum Stepper & Servo Motors
    Replies: 8
    Last Post: 26-03-2014, 11:52 AM
  3. Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
    By craynerd in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 16-03-2014, 07:29 PM
  4. Stepper Motor Power Question
    By boldford in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 17-07-2012, 09:40 AM
  5. common wire on stepper motor question
    By progomez in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 27-10-2009, 11:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules