. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 22-01-2019 #1
    mekanik's Avatar
    Lives in Barrow in Furness, United Kingdom.
    mekanik
    Last Activity: 2 Weeks Ago Has been a member for 9-10 years. Has a total post count of 799. Received thanks 99 times, giving thanks to others 176 times.
    Quote Originally Posted by feldah View Post
    I have one piece of aluminum 1500mm milled to a precision of 0.004mm. but everybody says aluminum will be too much affected by temperature. Would you say the same?

    Sent from my MI 6X using Tapatalk
    If your Ally is of reasonable cross section so it doesn't bend then temprature is not a problem it's still going to be flat and that tolerance over 1500mm is as good as any precision straight edge you can buy. as routercnc has stated you can't get it perfect but with time and patience it's going to be fit for purpose.
    Regards
    Mike
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to mekanik For This Useful Post:

    feldah
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DIY straight edge with Epoxy+ aluminum profile. Will it work?
    By ba99297 in forum Tool & Tooling Technology
    Replies: 11
    Last Post: 19-10-2019, 09:54 PM
  2. A4 Reference Chart Storage
    By magicniner in forum Workshop & Equipment
    Replies: 5
    Last Post: 29-06-2016, 05:54 PM
  3. Establisihing reference for rail alignment
    By tropostudio in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 14-05-2015, 08:28 PM
  4. can't cut straight or even drill straight, so need help
    By deannos in forum Machine Discussion
    Replies: 2
    Last Post: 02-10-2011, 05:35 PM
  5. Schematic Symbol Reference
    By Lee Roberts in forum General Electronics
    Replies: 1
    Last Post: 23-01-2008, 03:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules