Quote Originally Posted by ericks View Post
I just completed a panel. Was going to offer it for sale but decided to use it on my own machine. The way i do the ventilation/cooling is filter on side bottom and fan on side top opposite side.
Ahhh, so you're using your fan in sucking mode I guess?? Mine's blowing into the enclosure, but the airflow route must be similar. I always tend to go for blowing into the enclosure in equipment I've designed in the past as it's marginally better dust-wise to have the enclosure slightly pressurised, though with a well sealed box like these control enclosures it won't make any difference at all.

Same as you i used the AXBB-E and although it works good the way they designed it makes wiring a bit complicated....i am currently working on a better solution for that. Another thing i am working on is to make wiring to the sensor plugs easier and faster. Just thought this might give you some ideas for your next one :)
Aye, the enormous number of screw terminals is a PITA - if I were making even just a few units I'd lay out my own breakout PCB with onboard connectors and interface to something like the UC400ETH via some flat cables.