Threaded View
-
24-05-2019 #8
Thanks for your comments Kit.
I installed a baffle box and extraction fan pretty early on. It does a good job and motors barely get warm, though my jobs aren't much longer than around 20 mins.
As for the fire risk, I NEVER leave the shed when the CNC is powered up. If I have to go somewhere, I switch off and make sure EStop is engaged. I also have a fire extinguisher next to the machine.
I've been running the 2.2kw water cooled spindle from day one :). I still need a decent dust extraction system though. Working on it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Finished. DIY CNC
By Husky1 in forum DIY Router Build LogsReplies: 20Last Post: 09-09-2022, 01:23 AM -
BUILD LOG: Finished builds picture menu
By routercnc in forum DIY Router Build LogsReplies: 9Last Post: 05-12-2021, 12:28 PM -
CNC router enclosure
By Leadhead in forum Workshop & EquipmentReplies: 2Last Post: 03-05-2018, 11:00 PM -
router sound proofing
By universally in forum General DiscussionReplies: 4Last Post: 02-10-2015, 05:30 PM -
Drill / Tap Guide Jig - Finished!
By Wal in forum Metalwork Project ShowcaseReplies: 10Last Post: 04-12-2014, 09:59 PM
Bookmarks