Help programming DSE Lite for AC10

[JonathanW]

My first post ��

I took delivery of my Parker AC10 2.2KW VFD last Friday, I also purchased a Rattm 2.2kw spindle motor off ebay.


Here is my setup Note* Done with the keypad.

F160 = 1- Reset to default
F801 = 2.2 – Rated motor power (kW)
F802 = 220 – Rated motor Voltage
F803 = 8 - Rated motor Current (A)
F804 = 2 – Number of poles (Don’t worry if this is not correctly (Note F800))
F805 = 24000 –Rated motor Speed RPM (Press up arrow until the decimal point moves)
F810 = 400 - Rated motor frequency
F111 = 400 -Max Frequency
F112 = 116.6 – Min Frequency (Hz) (7000~ RPM
F113 = 116.6 – Target Frequency (Hz) (7000~ RPM)
F114 = 2 – First acceleration
F115 = 2 – First Deceleration
F152 = 55 – Output voltage corresponding to turnover frequency. (220/400) X 100 = 55
F800 = 1 - Rotating tuning - Note requires a free running spindle NO load

[Unrun]

Hi Jonathan.

thanks a lot for that. Never mind the fiasco getting the programmer to work. In frustration I'd since bought another VFD. This one setup a lot more easily and I'm up and running...I am, however, still left with the original unit so this might well help!
: - )