Thread: better than smooth stepper
Hybrid View
-
01-10-2009 #1
Because you mention the Smooth Stepper which only works with Mach3, then I presume that is the controller you are asking about.
First off, have you considered the LPT? First and best option for Mach output IMO. Depends what pulse rate you need.
The later PCI Galil cards work with Mach3. They would be a step up.
About ten times the price of the SS unless you can get a second hand one.
Look on the Mach support forum for info on the Galil plugin.
Greg
-
01-10-2009 #2
Do you need it to work with Mach 3? if not there are loads of CNC controllers out there.
If it needs to work with Mach 3, you will be restricted.
Most of the CNC controllers that dont work with Mach, also dont need a PC.Last edited by Gary; 21-10-2009 at 01:30 PM.
Visit Us: www.automationshop.co.uk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
how to smooth stl model, smooth curves out of straight lines
By chris in forum DeskProtoReplies: 4Last Post: 21-01-2014, 11:00 PM -
Smooth Steppers are finally available in UK !
By rnr107 in forum Marketplace DiscussionReplies: 63Last Post: 13-07-2012, 12:53 AM -
FOR SALE: Smooth Stepper board Plus C24 and C25 BOB
By AdCNC in forum Items For SaleReplies: 2Last Post: 11-09-2011, 09:56 PM -
FOR SALE: Smooth Stepper (UK)
By lateAtNight in forum Items For SaleReplies: 2Last Post: 24-06-2010, 10:19 PM
Bookmarks