Thread: CNC/ 3D printer project
Threaded View
-
01-04-2019 #1
Unfinished CNC/3D printer project. The main frame is a Stratasys Genisys industrial printer. Strong solid cast metal frame with strong linear rail and stepper motors. I had planned to retrofit it into a bench top CNC router and retrofit the printer with reprap 3d printer electronic and extruder to use standard printer filament. And have a duel machine. A few people have retrofitted these printers with reprap type printer electronics since I started a fourm discussion on line. I done have the space at my place and would like to free up the space at home or time to finish the project unfortunately.
I can get a price for shipping it to The UK if there is interest.
Axis travel distance; Y 250mm, X 410 mm and Z280mm
Heated bed size; 230mm x 395mmx
Machine size; 80cm deep, 72cm high, 92cm wide
CNC controls x2 (one never used, one second hand)
Ramps 1.4 3D printer control board
3x stepper controllers
24v power supply
30v power supply
3D printer extruder
24volt spindle.
£1300
Last edited by liamo1991; 01-04-2019 at 03:24 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
looking for a good 3d printer
By Ross77 in forum 3D Printing MachinesReplies: 139Last Post: 07-05-2019, 01:54 PM -
Here comes my DIY 3D printer
By A_Camera in forum 3D Printing MachinesReplies: 4Last Post: 25-06-2018, 10:50 AM -
Building my own 3D printer
By Washout in forum 3D Printing MachinesReplies: 4Last Post: 22-08-2014, 03:15 PM -
New toy, Afinia 3D printer
By Robin Hewitt in forum 3D Printing MachinesReplies: 34Last Post: 05-07-2014, 11:18 AM -
eBay: 3d Printer project!
By andrewbond in forum Items On eBay UKReplies: 8Last Post: 11-05-2013, 08:07 PM
Bookmarks