. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-04-2019 #12
    cropwell's Avatar
    Lives in Nottingham, United Kingdom.
    cropwell
    Last Activity: 28-05-2023 Has been a member for 9-10 years. Has a total post count of 1,646. Received thanks 170 times, giving thanks to others 30 times.
    Quote Originally Posted by ngwagwa View Post
    Thanks, so which spindle should I be looking at bearing in mind it is for finishing only so RPM is more important than power.
    I can't recommend any spindles as I do not know the run-outs of any. I would reckon a 2.2KW spindle and VFD kit would probably do, but it sounds as though you would want quality rather than cheap Chinese.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to cropwell For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help required with mill conversion / upgrade.
    By swarf-boy in forum Milling Machines, Builds & Conversions
    Replies: 8
    Last Post: 06-12-2018, 12:33 PM
  2. Upgrade to x axis required. MG or HG rail
    By marbles in forum Rails, Guideways & Bearings
    Replies: 0
    Last Post: 10-12-2017, 01:51 PM
  3. Roland camm 2 pnc 2300 spindle upgrade help
    By iampete in forum Gantry/Router Machines & Building
    Replies: 0
    Last Post: 01-09-2014, 03:17 PM
  4. Kress Spindle upgrade to a 2kw
    By Metal pecker in forum Kress Milling Motors
    Replies: 4
    Last Post: 05-05-2014, 12:22 PM
  5. advice on upgrade to 5 axis control
    By alanb in forum General Electronics
    Replies: 17
    Last Post: 27-07-2012, 06:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules