Isel 4433 - Can I use Mach3 with it?

[john swift]

with no reply from Isel 4433 users
its possible its a re badged Chinese machine
and photos of both the interior and exterior of the control box will help identify what you have

John

[loudew]

with no reply from Isel 4433 users
its possible its a re badged Chinese machine
and photos of both the interior and exterior of the control box will help identify what you have

John

Sorry John. Don't quite understand. What are you suggesting? I am going to buy this machine - if it means I can't use mach4, sobeit. However, galaad looks fairly old-fashioned.
Thanks for the reply, John.
L

[john swift]

I had miss read your post

I thought you had bought the machine - my mistake

may be you could try to get photos from the seller you can post

John

[loudew]

I have attached photos of the machine. I think it is a genuine ISEL machine - I am buying it from a school who have are the 2nd owners.

Thanks John,
L

[Doddy]

It may require you (or be easier for you) to take strip out the electronics back to the axis drive motors, and re-introduce stepper drivers (assuming stepper motors), BoB and maybe PSU. It's not difficult and for the tiny price that you're paying for the machine you'll get a capable machine for very little outlay.

Re-using the existing electronics? - get some control-box images as previously suggested.

[john swift]

the machine looks like it is worth the money without the electronics

the base of the machine is large enough to house the electronics

if it has a RS232 serial connection to the PC
I expect it has a motion controller that only works with propriety software and would not work with mach 3 or 4

the devil is going to be in the detail but
replacing the existing motion controller with some thing like Warp9's Ethernet SmoothStepper (£55) could be an option *
if you can re use the existing stepper drivers and power supply

( *a generic breakout board connected to an old PC's parallel printer port will be cheaper)

the spindle motor speed control used will determine how easy it will be to re use the existing spindle

John

PS
on the net are a few threads on converting Denford lathes
(Denford is another supplier of machines to the education establishment )

https://www.summet.com/blog/2016/01/...speed-control/

you may find the ISEL electronics is similar

[loudew]

Okay. I will get more pictures on Monday just to see. It has a serial connection, yes. So would it be as simple as swapping out a board?
Thanks for the help
L

EDIT:
I have been researching ESS boards - have also looked on Warp9's website and found different UK distributors. Both linked distributors are selling an ESS for around £170. If you could link a cheaper alternative, that'd be great!
Thanks L