. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-04-2019 #3
    Kitwn's Avatar
    Lives in Don, Tasmania, Australia.
    Kitwn
    Last Activity: 17-11-2025 Has been a member for 7-8 years. Has a total post count of 985. Received thanks 118 times, giving thanks to others 52 times.
    Clive,
    Good point. The -ve sign makes sure the first motor to home waits for the second one to home before the two then move to their zero position together. Both entries for the gantry motors must end with identical lines such as HOME_SEQUENCE = -2 for the sequence to work correctly.
    Note that HOME_SEQUENCE = 0 should be used for the Z axis to home Z first and lift it clear of obstructions before X and Y begin to move.

    Kit
    Reply With Quote Reply With Quote

  2. The Following 2 Users Say Thank You to Kitwn For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Why is Y axis "squaring" necessary only with twin motors?
    By MartinS in forum Linear & Rotary Motion
    Replies: 10
    Last Post: 09-08-2017, 10:10 PM
  2. What do I need to run LinuxCNC???
    By gatesy in forum LinuxCNC (EMC)
    Replies: 22
    Last Post: 02-12-2015, 07:42 PM
  3. Setup for squaring twin X-axis gantry
    By routercnc in forum Gantry/Router Machines & Building
    Replies: 20
    Last Post: 26-03-2014, 11:13 PM
  4. Seeking some practical squaring advice.
    By Wal in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 09-01-2014, 12:04 AM
  5. How many LinuxCNC/EMC users do we have?
    By birchy in forum LinuxCNC (EMC)
    Replies: 16
    Last Post: 30-12-2012, 08:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules