. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 23-04-2019 #1
    Hitek's Avatar
    Lives in The Valley, Anguilla.
    Hitek
    Last Activity: 23-04-2019 Has been a member for 5-6 years. Has a total post count of 1.
    Hi All
    Im having trouble with my puls settings on my 1325 dsp cnc router. the x and y are set to 120 and the z to 400 but its cutting too deep and i dont know the right settings that should be input. can anyone point me in the right direction?
    any help would be much appreciated.
    Many thanks in advance
    Reply With Quote Reply With Quote
  2. 23-04-2019 #2
    magicniner's Avatar
    Lives in Rotherham, United Kingdom.
    magicniner
    Last Activity: 05-05-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,021. Received thanks 230 times, giving thanks to others 42 times.
    By moving it a set distance and measuring the actual movement you can calculate the required setting.
    You think that's too expensive? You're not a Model Engineer are you? :D
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fanuc red cap pulse coder identification?
    By Ross77 in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 09-11-2018, 08:47 PM
  2. pulse generator for M542 to use on a optimum BF46 Vario
    By gnalbant in forum Optimum Milling Machines
    Replies: 2
    Last Post: 03-07-2016, 11:50 AM
  3. pulse equivelant calculation
    By yasser in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 17-05-2016, 10:10 AM
  4. MPG or Hand Wheel Pulse Encoder where to buy in UK?
    By suesi34e in forum Marketplace Discussion
    Replies: 5
    Last Post: 02-01-2014, 04:41 PM
  5. Pulse rate or dip switch settings
    By Jopo in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 29-04-2013, 08:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules