Thread: DIY ATC Spindle
Threaded View
-
22-04-2019 #1
Hello,
I am building my own atc bt30 spindle. For the motor i will use my current 2.2kw water cooled spindle with 1:2 gear ratio for more torque at lower speeds but since it is heavy, noisy and take a lot of space in my z axis configuration (no space for air cylinder) i was thinking to use smaller brushless motor for rc boats. Since i dont have that much electrical knowledge i would like to know if this motor would even work for such task? They are small, high rpm, water coolled but i have no idea if this can handle 8h+ work a day? Here is the link for the motor:
https://www.skyrc.com/Power_System/Proteus_x524
Please help?
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Chinese 300W DC spindle - is the spindle shaft grounded?
By HankMcSpank in forum Spindles & Drive MotorsReplies: 44Last Post: 26-11-2016, 07:25 PM -
TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
By RoyT in forum Spindles & Drive MotorsReplies: 5Last Post: 29-09-2014, 02:42 PM -
CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
By spindeldoctor in forum Manufacturer NewsReplies: 0Last Post: 13-11-2013, 07:50 PM -
Spindle lock mechanism for 2.2kW china spindle
By Jonathan in forum Generic Chinese SpindlesReplies: 8Last Post: 13-08-2012, 08:39 PM -
DIY Spindle - What type of bearings are best suited for a spindle.
By 8iggles in forum Spindles & Drive MotorsReplies: 18Last Post: 09-02-2011, 10:15 PM
Bookmarks