. .

Thread: DIY ATC Spindle

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 23-04-2019 #6
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    I dissagre. This system works perfectly. There is a stack of 42 belleville washers in the shaft, with enough force to hold the tool with six 5mm bearing balls. I will demonstrate when the spindle is build in a month or so.
    Last edited by Husky1; 23-04-2019 at 07:57 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  3. CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
    By spindeldoctor in forum Manufacturer News
    Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. Spindle lock mechanism for 2.2kW china spindle
    By Jonathan in forum Generic Chinese Spindles
    Replies: 8
    Last Post: 13-08-2012, 08:39 PM
  5. DIY Spindle - What type of bearings are best suited for a spindle.
    By 8iggles in forum Spindles & Drive Motors
    Replies: 18
    Last Post: 09-02-2011, 10:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules