. .

Thread: DIY ATC Spindle

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 19-02-2020 #11
    Husky1's Avatar
    Lives in Ljubljana, Slovenia.
    Husky1
    Last Activity: 12-07-2022 Has been a member for 9-10 years. Has a total post count of 36. Received thanks 1 times, giving thanks to others 0 times.
    I am getting BST Automation 3.8KW, 15Nm servo motor for my spindle shaft motor, with 1:4 ratio to get 10krpm. Hope this will work much better than current 2.2Kw water cooled spindle providing only half the power of the new setup and with much much less noisy working.
    Last edited by Husky1; 19-02-2020 at 10:10 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  3. CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
    By spindeldoctor in forum Manufacturer News
    Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. Spindle lock mechanism for 2.2kW china spindle
    By Jonathan in forum Generic Chinese Spindles
    Replies: 8
    Last Post: 13-08-2012, 08:39 PM
  5. DIY Spindle - What type of bearings are best suited for a spindle.
    By 8iggles in forum Spindles & Drive Motors
    Replies: 18
    Last Post: 09-02-2011, 10:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules