Quote Originally Posted by bluesking View Post
Thanks, it would certainly make things easier to go with air-cooled. I have a small room set aside for the CNC to go in anyway, so that will probably be the best way to deal with overall noise.

You mention that you have a brushless spindle? The one I'm looking at has brushes as far as I know:
https://www.aliexpress.com/store/pro...56c041d6TtIpdJ

I can't find brushless spindles above 1kw. Where did you get yours?
The link is not working.
Anyway, all three phase spindles are brushless, for example this one:

https://www.ebay.com/itm/From-EU-3-P...8AAOSwBydbh178

Note that this is just one I picked from ebay, though I bought mine from a different seller. Anyway, the only thing I'd do differently today is that I'd probably by a spindle with square housing today, and if possible, I'd buy one with active cooling fan, which is driven with a separate 24V, so the fan has a constant speed. I think those are better than the round ones with the fan mounted on the motor axis.