Threaded View
-
26-04-2019 #1
I'm looking at buying this machine, this is the description...
C-Beam bought from Ooznest. The Dewalt Router D26200(GB) comes included and the stepper motors are 2.8A rated to 175oz. It's a shame to say but sadly it didn't get the use it deserved, especially seeing how its such a nifty machine! Cutting area X&Y 305x280mm and the Z axis has up wards of 160mm travel.
I'm hoping the spec is good enough to work with wood for guitars and turntable plinths etc.
It's up at £400
But I'd need to extend the working area considerably to 1000 x 500. I could maybe compromise a little but if it's possible I'd go slightly bigger.
Many thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Choosing right CNC
By rockstardmtb in forum Machine DiscussionReplies: 0Last Post: 09-04-2019, 09:59 AM -
Choosing a machine
By Tony B in forum Machine DiscussionReplies: 1Last Post: 15-12-2018, 09:25 AM -
choosing a 240v single pahse cnc milling machine
By Jeromep in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 18-09-2015, 02:24 PM -
need help! choosing right kit
By msacnc in forum Gantry/Router Machines & BuildingReplies: 26Last Post: 17-09-2014, 09:41 AM -
choosing a spindle.
By charlieuk in forum Spindles & Drive MotorsReplies: 15Last Post: 16-01-2014, 08:18 AM
Bookmarks