Thread: CSMIO-IPS input voltage.
Threaded View
-
28-04-2019 #1
Hi all,
Looking at the CS-labs plugin in MACH3, (for csmio-ips controller) where it shows the input voltage reading that should be 24v, the input voltage on my setup is showing 48v. The power supply to the controller is definitely putting out 24v and all is working fine. Can't work out why it should be showing 48v on the plug in diagnostics screen. Anyone else out there have the same controller with the same strange voltage read out or any idea what may cause this?
Cheers
Al
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Looking for input
By jtar40 in forum Motor Drivers & ControllersReplies: 0Last Post: 29-03-2018, 11:56 PM -
E-Stop input problem
By eurikain in forum General ElectronicsReplies: 9Last Post: 21-02-2016, 08:31 PM -
Help re electrical input
By Jomach21 in forum Motor Drivers & ControllersReplies: 1Last Post: 08-06-2015, 12:30 PM -
Haunyang VFD input voltage
By JamesUS in forum Spindles & Drive MotorsReplies: 0Last Post: 18-01-2015, 08:25 PM -
Aluminum router build - Could use some input
By Tumblebeer in forum Gantry/Router Machines & BuildingReplies: 17Last Post: 01-09-2014, 09:48 PM
Bookmarks