. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-05-2019 #4
    pippin88's Avatar
    Lives in Newcastle, Australia.
    pippin88
    Last Activity: 1 Day Ago Has been a member for 9-10 years. Has a total post count of 101. Received thanks 12 times, giving thanks to others 1 times. Referred 1 members to the community.
    Don't cut the tube. Add diagonal braces and end caps (welded, glued, or bolted).

    Don't worry about weight. My dual drive 381 Oz in steppers will throw around my 100kg gantry system at 20metres/min.
    Last edited by pippin88; 03-05-2019 at 12:11 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need advice on gantry design
    By jcarpenter in forum Gantry/Router Machines & Building
    Replies: 33
    Last Post: 13-05-2018, 01:51 PM
  2. Advice and opinions 3 axis gantry for cutting Ply / Hardwoods
    By Jeff in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 09-10-2017, 04:38 PM
  3. Physicist trying to do engineering. Not going well. After advice with 4 axis gantry.
    By dr_rob in forum Gantry/Router Machines & Building
    Replies: 17
    Last Post: 07-12-2016, 11:34 PM
  4. Fixed Gantry small precision begineer project advice
    By yasu in forum Gantry/Router Machines & Building
    Replies: 11
    Last Post: 17-10-2016, 07:14 PM
  5. Gantry design advice please
    By D-man in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 07-11-2012, 04:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules