Repacking nut... numbering on diverters?

[Lee Roberts]

I don't think the numbers matters, I've never followed any convention resulting in conviction.

I've re-packed quite a few of these so if you get stuck and want to send it to me only the postage cost is involved.

I do the same and load the nut up with enough grease to keep the balls in place but not to much you cant see what your doing, you can use the screw or a nicely sized pipe to keep them in place as you re-load each circuit.

1605 balls are 3.175mm (1/8") size
1610 balls are 2.778mm (7/64") size

1605 has 3 circuits
1610 has 2 circuits

17 balls in each circuit.