Am882 drives

[Crunch]

Found it thanks

leadshine 2phase stepper driver AM882 AM882H DMA882S, input voltage :0VDC-100VDC/20VAC-80VAC both can work

the latest version is DMA882S use for replace AM882 AM882H

​the different between am882 and AM882H is am882h with fan, am882 no fan





1.Sensorless stall detection
2.Extra-low motor noise offers excellent quietness
3.Optimizes torque and nulls mid-range instability
4.Self-test and Auto-configuration technology
5.Options to set output current and microstep relolutions via DIP switch or software
6.Microstep from 1 to 512
7.Supply voltage up to +80 VDC
8.Output current programmable, from 0.5A to 8.2A
9.Automatic idle-current reduction and reduction rate is software configurable
10.Fault out prevents damages to your machines or the materials

[m_c]

IIRC AM882 are DC input only, whereas the H version will accept DC or AC input.
Not sure about the DK bit.

The DM-S drives are Leadshines latest drives, aimed to replace the old DM, AM, and EM drives, however they don't appear to have the same functionality as AM/EM drives as the only configuration is via DIP switches.

And having just checked the leadshine website, I see they've just launched an EM-S drive, and all mention of DM-S has disappeared...
I wonder if the DM-S didn't quite pass CE approval like the AM drives, so they've launched a new tweaked design for the EU/US?