Help with .stl file

[EddyCurrent]

Sorry about the oversight earlier, these two files are correct and as per drawings.

Images show the stl files opened in CamBam

In the CAD (Rhino6) I used a "Two Rail Sweep" with the end profiles being the two rails and the scalloped profile being the cross section.

[johnsattuk]

Hi Eddy

Thanks once again, I consider that a fortunate escape for me, they get a bit precious over their bits of wood

I bet one of them will want a flat one anyway

John

[EddyCurrent]

Some people also CNC cut the fret slots but I use these;

https://www.stewmac.com/Luthier_Tool...Templates.html
https://crimsonguitars.com/store/cir...ret-saw-blade/

[johnsattuk]

I have been CNC cutting the slots, allows cutting on the radius and also somebody wanted blind slots, a bit cross your fingers with .5 mm cutters in hard wood

[cropwell]

I have been CNC cutting the slots, allows cutting on the radius and also somebody wanted blind slots, a bit cross your fingers with .5 mm cutters in hard wood

So what have you been using so far for the open slots ?

[johnsattuk]

Ive been using 0.5 mm slot drills, I generate the code using Fretboard.exe which is in imperial, so generate the code and scale it in Discriminator to suit the Estlcam controller.

[johnsattuk]

Cut a test one in a bit of pine,